cisco catalyst 9130 access point association wlc.

[Anjana A]

Hello,

pls share the command to make 9130  catalyst access point to associate with the wlc.

(like capwap ap primary controller ip and hostname).

Regards,

Anjana

[pieterh]

take a look at this page: Cisco Catalyst 9130AX Series Access Point Getting Started Guide - Cisco

section Troubleshooting the Access Point to Cisco Controller Join Process
and Enter configuration mode at the Cisco IOS CLI

[Leo Laohoo]

Console into the AP and post the entire boot-up process.

[RoadRunner4k]

Console to AP and use CLI cmd   "config ap primary-base Controller_name AP_name Controller_IP"