11-09-2012 12:04 AM - edited 07-03-2021 11:00 PM
Hello, I couldn't find this on the Cisco Flex 7500 specs
Do anybody know if I can set up an anchor mobility group between the Flex 7500 and the WLC 5508?
Kind regards
Solved! Go to Solution.
11-09-2012 11:09 AM
Yes, 5508 can be used as anchor controller for static anchoring while 7500 as foreign using central swtiching.
For Mobility:
It is recommended to use Flex 7500 as both the primary and backup controllers.
Flex 7500 primary and backup controllers must be in the same mobility domain.
Ref:
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml
11-09-2012 11:09 AM
Yes, 5508 can be used as anchor controller for static anchoring while 7500 as foreign using central swtiching.
For Mobility:
It is recommended to use Flex 7500 as both the primary and backup controllers.
Flex 7500 primary and backup controllers must be in the same mobility domain.
Ref:
http://www.cisco.com/en/US/products/ps11635/products_tech_note09186a0080b7f141.shtml
11-20-2012 07:42 AM
Thank you very much Saravanan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide