ISE virtual appliances are supported on VMware ESXi 5.x and 6.x or KVM on Red Hat 7.x. A production deployment should be run on hardware that equals or exceeds the configurations of the current physical ISE platforms. For lab or testing environments that provide no product services, the solution can be run on virtual targets that have at least 4 GB of memory and at least 200 GB of hard drive space available.
Table of Contents
Table of ContentsOverviewConnecting a Catalyst 9800 WLC to Cisco DNA Center ManuallyConnecting an AireOS WLC to Cisco DNA Center ManuallyCisco DNA Center Assurance Deployment Guide References
Overview
The purpose of this document...
view more
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
view more
Problem Description:
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...
view more
Looking to provide wifi overkill in my home. It's two story with a basement. I am thinking two aironet 1600's. What do you think?Let me know if there is some other model I should be looking at.
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
General information:
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
view more