10-28-2013 10:20 PM - edited 07-04-2021 01:10 AM
Hello
I have a Cisco AIR-BR1310G-A-K9-R which is cuurently running Cisco IOS C1310-K9W7-M Version 12.3 (8) JEA. I have trying to figure out idf there is anewer version of the IOS for this model and if so what improvements does it have over my current version? I hope that someone can help me with this, please!
Thanks!
Doug
Solved! Go to Solution.
10-29-2013 01:13 PM
Hi Doug,
12.4.25d-JA2 is the latest IOS you can find for this product platform. Refer the below link to see available software for this product.
Downloads Home -> Products -> Wireless ->Outdoor Wireless ->Cisco Aironet 1300 Series -> Cisco Aironet 1310 Access Point/Bridge -> Software on Chassis -> Autonomous AP IOS Software-12.4.25d-JA2
Herewith attached the feature comparison of this new image & the one you currently got using Cisco Feature Navigator.
HTH
Rasika
**** Pls rate all useful responses ****
10-29-2013 02:42 PM
Latest software link:-
http://www.cisco.com/en/US/products/ps5861/prod_release_notes_list.html
September 2012
These release notes describes caveats and important notes for maintenance release Cisco IOS Release 12.4(25d)JA2. There are no new features in this release. This release supports 32-Mb autonomous Cisco Aironet 1040, 1130, 1140, 1240, 1250 and 1260 and 1300 and 1400 series access points/bridges.
10-29-2013 12:47 AM
Hello,
You need to read the release notes for newer versions to see what improvements and/or features are available.
Here is the link of all release notes of 1310 AP software:
http://www.cisco.com/en/US/products/ps5861/prod_release_notes_list.html
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"
10-31-2013 03:47 AM
Hi Amjad
Tha you for your help and your prompt response, it is truly appreciated!
Doug
10-29-2013 01:13 PM
Hi Doug,
12.4.25d-JA2 is the latest IOS you can find for this product platform. Refer the below link to see available software for this product.
Downloads Home -> Products -> Wireless ->Outdoor Wireless ->Cisco Aironet 1300 Series -> Cisco Aironet 1310 Access Point/Bridge -> Software on Chassis -> Autonomous AP IOS Software-12.4.25d-JA2
Herewith attached the feature comparison of this new image & the one you currently got using Cisco Feature Navigator.
HTH
Rasika
**** Pls rate all useful responses ****
10-31-2013 03:39 AM
Hi Rasika
Thank you for your response and for the spreadsheet both are appreciated and especially the spreadsheet! Is that someting that you put together or are sheets like this available from cisco somewhere?
Doug
10-31-2013 12:26 PM
Hi Doug,
You can get the same information using Cisco Feature Navigator Tool. I used it to compare the two images & posted the output in xls format.
Thanks for rating the response
HTH
Rasika
10-29-2013 02:42 PM
Latest software link:-
http://www.cisco.com/en/US/products/ps5861/prod_release_notes_list.html
September 2012
These release notes describes caveats and important notes for maintenance release Cisco IOS Release 12.4(25d)JA2. There are no new features in this release. This release supports 32-Mb autonomous Cisco Aironet 1040, 1130, 1140, 1240, 1250 and 1260 and 1300 and 1400 series access points/bridges.
10-31-2013 03:44 AM
Hi Abha
Thank you for your help!
Doug
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide