Cisco Lightweight Access Point QoS Switchport configuration

[CB90021204]

Hi,

When configuring lightweight Wireless Access Points in Flexconnect mode, should you trust CoS or DSCP on the switchport the Wireless Access Point is connected to?

Currently for local mode access points, I configure the switchport to trust DSCP and the WLC to trust CoS.

Thanks,

[Rasika Nayanajith · Accepted solution]

Hi,

If you are doing FlexConnect Local Switching & your concern is mainly user traffic adhere what ever the configured QoS profiles, then trust CoS.

If it is Central Switching, or your concern is CAPWAP management traffic get DSCP of CS6, then you need to trust DSCP.

Below post may be help you to understand this topic bit in detail.

http://mrncciew.com/2013/07/23/qos-for-h-reap/

HTH

Rasika

*** Pls rate all useful responses ****

[CB90021204]

Thank you