[Cisco MDS Switch 9148] I have port config question.

[DaeHoonKim8216]

I have a question about the Cisco mds switch Our customers use Cisco Mds Switch 9148.

Customer want the port state to be activated automatically.

Please refer to below case.
For example, storage failover testing.
The customer failover situation is that all mds switch ports are shut down. Then, they are activate all ports again.

The customer told me. Can you set the port to activate automatically?
Please let me know, if available to do that.

I will really appreciate it.

Thank you for reading.

[patoberli]

You are here in the Wireless forum, I suggest you open the thread in the Switching or Storage one.

Regarding your question, if the port on the MDS is not shutdown, then it should automatically turn back on, as soon as a cable is plugged in and the device on the other side is working.