02-17-2013 05:02 AM - edited 07-03-2021 11:33 PM
Hello,
In the NCS we got 5 WLANS
When we navigate to AP groups default-group wlans we see only 4 SSIDS
Any ideas?
Solved! Go to Solution.
02-18-2013 04:41 AM
Your talking about NCS... It defaults when you create it on the WLC, not NCS.
Sent from Cisco Technical Support iPhone App
02-17-2013 08:16 AM
The NCS and WLCs do not sync their data. You must refresh the config from the WLC in order to have the same configuration info. So when you are under configure controllers, on the drop down on the top right is an option to refresh the config from the WLC. You click that and then don't retain the old info when it prompts you.
Sent from Cisco Technical Support iPhone App
02-17-2013 01:49 PM
Hi Scott,
I know that.
My qustion is how it possible that the SSID is configured in the NCS but it doesn't appear inside the SSIDs in the default ap group.
I even tried to recreate the problem with no success...
Please see the attachment.
Thanks,
Omer Shtivi
02-17-2013 02:40 PM
The attachement is hard to see... I beleive as long as you have the SSID defined in NCS, you can add that to the default-group. I tend to create everything on the WLC then refresh the config and delete the old.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
02-18-2013 04:36 AM
When you create a new SSID it's automaticliy enters the default ap-group right?
Because in the default ap-group all the SSIDs always working.
So why is one of the SSID isn't appears inside the default ap-group?
02-18-2013 04:41 AM
Your talking about NCS... It defaults when you create it on the WLC, not NCS.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide