10-15-2013 05:35 AM - edited 07-04-2021 01:05 AM
Hi,
i'm reading the doc at http://www.cisco.com/en/US/customer/docs/net_mgmt/prime/infrastructure/2.0/quickstart/guide/cpi_qsg.html#wp46865
and I'm searching for the CPU requirement for a Standard installation. From table 2 in this document, I will need 16 virtual CPUS but there is no frequency mentioned. Does someone know what is the minimum CPU frequency to run PI 2.0 correctly?
Thanks
Theo
Solved! Go to Solution.
10-19-2013 08:13 PM
The ova does not require a specific frequency of CPU. Whatever you provide will work as long as your ESX environment can allocate the required number of vCPUs.
10-19-2013 08:13 PM
The ova does not require a specific frequency of CPU. Whatever you provide will work as long as your ESX environment can allocate the required number of vCPUs.
10-20-2013 11:32 PM
Thanks Marvin for your help
Best regards
Théophile
11-27-2013 05:49 AM
how can allocate the required number of vCPUs on prime infrastructure 2.0
Thanks
11-27-2013 05:54 AM
The number of vCPU's depends on your ESXi host, either your limited to 8 or you will have 16, 32, etc. The vCPU amount is defined on the VM or PI2.0 and you can change it after the VM has been installed. PI 2.0 has an Express (4 vCPU), Standard and Pro which require 16 vCPU. There is a custome express that uses the Express ova (4 vCPU), but you need to increase that to 8 vCPU. Hope that helps.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
11-27-2013 06:37 AM
thanks scott
how increase to 8 VCPU, but i want ask u i got this alarm (Message: CPU: 85 crossed down threshold: 90) on PI 2.0 so if i increase to 8 VCPU this problem solved or this problem solve by another way.
Please advice
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide