04-26-2014 04:07 AM - edited 07-05-2021 12:44 AM
Dears,
One of our customer is having a Cisco AIR-WLC2112-K9 , we purchased an AP AIR-CAP16021-C-K9 , based on the supplier recommendation ,
As I understand , CAP16021x Series require a Wireless Controller with firmware 7.4.x and above where as Cisco 2112 can be last updated to 7.0.,
Is there a workaround available ,
In dire need of help and support,
Hasan Reza
04-26-2014 08:24 AM
Hi Hasan,
1600 APs need minimum of 7.4 software on WLC and there is no way we can upgrade 2112 WLC to 7.4 code.
Only way to get 1600 AP register to WLC is to get a WLC which supports software 7.4 like 5508, 2504, WISM etc.
HTH.
Thanks & Regards,
Ishant
*** Please rate the post if you find it useful ***
04-27-2014 07:55 AM
04-27-2014 05:28 PM
The only work-around is to convert the APs to autonomous IOS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide