Hi
Can you please have a look at the config below. We have three Cisco Wireless AP's in a school that are currently being used. This is a very similar config for all three AP's.
I would like you to look at the IP address 10.38.208.202. The other AP's have 10.38.208.201 and 10.38.208.200 with a 255.255.240.0 mask.
If someone conntected to the wireless why would there not be an IP address conflict?
Current configuration : 2275 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname abc2
!
enable secret 5 H30cuCGy$1y2CqjIfDj83fmrlkMnw41
!
ip subnet-zero
!
!
aaa new-model
!
!
aaa group server radius rad_eap
!
aaa group server radius rad_mac
!
aaa group server radius rad_acct
!
aaa group server radius rad_admin
cache expiry 1
cache authorization profile admin_cache
cache authentication profile admin_cache
!
aaa group server tacacs+ tac_admin
cache expiry 1
cache authorization profile admin_cache
cache authentication profile admin_cache
!
aaa group server radius rad_pmip
!
aaa group server radius dummy
!
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa cache profile admin_cache
all
!
aaa session-id common
!
dot11 ssid abc1
authentication open
!
!
!
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
ssid abc1
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
no power client local
power client 50
power local cck 50
power local ofdm 20
channel 2462
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 10.38.208.202 255.255.240.0
no ip route-cache
!
ip default-gateway 10.38.208.1
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
!
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
bridge 1 route ip
!
!
!
line con 0
line vty 5 15
!
