cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
574
Views
0
Helpful
3
Replies

Assign mobility Anchors to WLAN - NCS

tsakoulias
Level 1
Level 1

Dear all,

I am trying to create some WLAN templates on the NCS (v1.2) and apply them to our WLCs.

Does anybody know how can i assign  mobility anchors to a WLAN with a template apart from a CLI template?

I searched the NCS configuration guide and i foundthat i can assign a mobility anchor to a WLAN using the Configure-->Controller-->WLAN path. No templates option available.

Then i thought i could create a new Controller configuration group and assign the WLAN templates and the CLI templates (with the anchors configs) to the group. Unfortunately the CLI templates are not available there....

Is a CLI template my only option?

Thanks for your help.

3 Replies 3

Stephen Rodriguez
Cisco Employee
Cisco Employee

From NCS you will need to use a CLI template.  Or depending on how many WLC you have just do it manually.

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

ramkris2
Cisco Employee
Cisco Employee

Yes, Correct. The templates won't have that option.

It has to be done using CLI templates or individually on a per controller basis from NCS/Prime Infrastructure.

tsakoulias
Level 1
Level 1

Thank you for your immediate response.

Review Cisco Networking products for a $25 gift card