Cisco WLC-2504 HA configuration

[Angus Bishop]

HI Experts ,

I am having 2 cisco 2504 WLC with 7.6 code . i need to configure HA in my network 

Can anyone tell the  license requirement and the procedure to do the same 

I have got several documents related to HA for 5508 but not able to find any for 2504 controllers 

Can any one help me out on this .

Thanks in Advance 

Agnus 

[Scott Fella]

The 2504 can only do HA N+1 with two licensed WLCs or one licensed and the other an HA sku WLC. I don't know which one you have, but the configuration is the same. Both WLCs needs to be configured and you need to set the access point primary and secondary controller to tell the AP which WLC should be the primary and secondary. 

http://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide/N1_HA_Overview.html

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/69639-wlc-failover.html

-Scott

[MARC WALTER]

Hi,

I have two  AIR-CT2504-K9 but only one of them is licensed.

Product Version.................................. 7.6.130.0

The plan was to configure HA but I don't even have the interfaces redundancy-management or

redundancy-port.

Could you please help?

Cheers,

Marc

[Scott Fella]

The 2504 doesn't support HA AP SSO, only N+1.  The other 2504 WLC that you say doesn't have a license needs to be an HA Sku in order to configure that as an HA N+1.

-Scott

[Scott Fella]

Here is the guide for HA N+1:

http://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide.pdf

-Scott

[shaikh.zaid22]

Hi Guys,

I have a AIR-CT2504-25-K9 and  a AIR-CT2504-HA-K9 with Rel. 8.0 can i configure it in HA ?

is there any guide for 2504 8.0 code to configure in HA active/standby mode? 

[Sandeep Choudhary]

HI Shaikh,

Here is  my post to configure HA  with these two models.

https://rscciew.wordpress.com/2014/06/07/n1-high-availability-configuration-on-cisco-2504wlc/

Regards

Dont forget to rate helpful posts

[shaikh.zaid22]

Hi,

I want to implement EAT-TLS in one client and i don't have any information regarding that, Can anyone guide how to implement from start?

[Scott Fella]

Just search google to be honest. The WLC configuration is straight forward, it depends on what radius server you are using. Just search for WLC EAP-TLS <your radius server>

The thing you will need to understand is the radius portion and the certificate authority server.

-Scott 

*** Please rate helpful posts ***

[Abhishek Abhishek]

The Cisco WLC 2504 only support  N+1. For details please refer to the link-

http://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide.pdf