cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
764
Views
2
Helpful
13
Replies

Cisco WLC 5520 GUI and CLI stuck

Clem58
Level 3
Level 3

Hello,

We have an EMEA central WLC, Cisco 5520 in HA with firmware 8.5.171.0, hosting around 400+ APs among multiple countries and sites, I was working on the CLI for reviewing some APs logs earlier, at a moment it got stuck.

Since this moment I cannot reach the GUI anymore, and for the CLI I enter my username once, and it's stuck too.

I can only use prime and I see the WLC is still running ok, and snmp looks like to work fine.

If I go into CLI sessions in Prime, I can see my session:

Clem58_0-1720537320996.png

Is this anything you have already faced ? Is there an easy way to solve ?

Do you know if there is a timeout for stuck CLI sessions ?

I can have access to CIMC console, but I will struggle to get into it with the JAVA old version etc ... So if you confirm it can be solved with waiting, I'm good with that !

Thanks by advance for your help.

1 Accepted Solution

Accepted Solutions

I was able to solve the issue without doing any failover.
I had a thought, I was looking into an AP log when I got stuck, and I remembered which AP is was. So I assumed the session was stuck maybe because of the AP.

So I bounced the AP port in the corresponding switch and immediately the GUI and CLI came back, Prime showing the CLI session is cleared.

I think that is a bug tbh, but I'm happy I got it cleared eventually.

View solution in original post

13 Replies 13

marce1000
VIP
VIP

 

 There is no timeout for that , well the meaning of stuck makes that contradictory. Pull the plug and check if the HA controller kicks in. If it does and the stuck controller can boot normally then you may have no interruptions. Check HA redundancy states afterwards. Also go for  8.10.196.0.

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

This WLC is really critical and I would want to find another solution, we need to have this session cleared, I will try to get into the CIMC and console.

For 8.10.196.0 that's impossible as we have some old APs 3700 3600.

We are anyway planning to migrate all our 5520 to new C9800 WLCs

 

      >....This WLC is really critical and I would want to find another solution,
    - It's worth trying but it may not work (too) , if it's stuck at some (internal) os-level or bug,
                    Since you have HA , won't the standby controller take over ?

    >...For 8.10.196.0 that's impossible as we have some old APs 3700 3600.
    It is as per https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
                                                                     Look them up in Table 8

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

So I can connect to CIMC after some tricks to get flash and java security bypassed, but when I connect to KVM console I have this screen :

Clem58_1-1720544425239.png

And I cannot do anything on this console.

That is really frustrating, we just need to clear this session but we cannot access GUI neither CLI or KVM via CIMC to do it...

 

    - Ref : https://community.cisco.com/t5/wireless/cisco-flexconnect-7510-won-t-boot-to-backup-image-stuck-on-quot/m-p/2706093#M95727
      Not sure if that has any relevance...

      Ref2 : https://www.cisco.com/c/en/us/support/docs/wireless/5520-wireless-controller/212170-Console-access-to-5520-8540-WLC-via-CIMC.html
    >...

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Many thanks Marce I was able to login to console using SSH and Serial over LAN feature, but even this console is stuck

 

  - I then don't see any other options then pulling the plug ,  will the HA-standby controller take over (as it is intended to do) ?

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

You mean restart the WLC from CIMC for example ? Then the standby would take over ?

 

   - Yes , then on the current active controller issue the command :
                                    show redundancy summary 

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Ok and when the 1st one is back we can force the switchover to have the 1st WLC back the active.

 

   - Depends  , you first need to execute the command     show redundancy summary 
     to check if there is someone (back alive) to take over (the former-stuck controller)

   M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '