04-07-2024 11:51 AM
I wanted to connect a Nikon Z9 and a Nikon D5/D6 (WT-6 adapter) to the Nikon Camera Control 2 Pro software via WIFI. Unfortunately the software says there is no camera. By the way, the computer is connected to the same SSID network. If I connect the camera with cable and PC/laptop via switch, the connection works. I am assuming that it is a multicast connection and MDNS. Does anyone know this problem? the WLC is type 9800-CL with v17.12.03 Thanks for the support.
04-07-2024 11:21 PM
>... I am assuming that it is a multicast connection and MDNS.
- You need to examine the specs of the camera and find out if it needs multicast (e.g.)
M.
04-08-2024 01:27 AM
You are correct this connections are mDNS based but I've never tried to conenct the cameras (in my case Canon) to a Cisco AP before, I always rely on a hotspot in my Android phone.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide