05-03-2018 12:08 AM - edited 07-05-2021 08:35 AM
Hi All,
I'm trying to check the radio power levels on 2 different WLCs running v8.3.
In one of the controllers, when I go to WIreless>>802.11a/n/ac Radios, I can see the Power Levels.
Whereas, on the other controller, it doesn't show the power levels, instead it has some Load Profile, Interference Profile columns. (Please see attached).
Could someone please assist?
Thanks.
Solved! Go to Solution.
05-20-2018 06:24 PM
Updating the case:
When you go to Monitor >> Access Points >> Radios >> 802.11a/n/ac or 802.11b/g/n
you won't see the power levels.
You see the power levels when you go to:
Wireless >> Access Points >> Radios >> 802.11a/n/ac or 802.11b/g/n
Hope it would help others too.
05-03-2018 12:12 AM
05-03-2018 12:15 AM
05-03-2018 12:36 AM
Uhmmmm ... I'd be upgrading first and see if it's made some improvements.
05-03-2018 04:21 PM
05-20-2018 06:20 PM
05-20-2018 06:24 PM
Updating the case:
When you go to Monitor >> Access Points >> Radios >> 802.11a/n/ac or 802.11b/g/n
you won't see the power levels.
You see the power levels when you go to:
Wireless >> Access Points >> Radios >> 802.11a/n/ac or 802.11b/g/n
Hope it would help others too.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide