11-06-2017 09:11 AM - edited 07-05-2021 07:48 AM
Hi,
Since we upgraded our WLC's to Code 8.3.132.0 we are facing issues with our Cisco WAP321. They are configured in Workgroup Bridge Mode and I'm still able to connect to the Web GUI. But the Device connected to the Ethernet Port of the WAP321 is not getting a answer from the DHCP Server. What could be the problem?
thanks,
Marc
11-06-2017 10:14 AM
Hi,
Are you using the same vlan for management and DHCP ? If you put a static IP on the device does it works?
-If I helped you somehow, please, rate it as useful.-
11-07-2017 02:06 AM
Hi Flavio
Yes, I',m using the same vlan for management and DHCP. If I put a static IP on the device connected to the WAP it works! But before we upgraded our WLC's from 8.2 to 8.3.132.0 it worked fine with DHCP enabled on both the WAP and the Device.
regards,
Marc
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide