07-25-2015 04:36 AM - edited 07-05-2021 03:38 AM
Hello All,
I am new one in wireless topic and I have one simple question.
CISCO876W-G-E-K9, we have 2 SSID enabled.
Unfortunately both SSID are not broadcasted (visible) and clients cannot see them.
The clients must setup SSID manualy and then are able to connect to Wi-Fi network.
Where can I setup broadcasting SSID on CISCO876W-G-E-K9 ?
Thank you very much.
Jan
Solved! Go to Solution.
07-27-2015 08:32 AM
Hi Jan,
Please forward the following output:-
show run interface dot11radio 0
Please note that you have to also add command mbssid under the radio interface
For ex:-
interface dot11radio 0
mbssid
Do let me know if you have any queries or concerns.
Regards,
Shubham
Don't forget to rate helpful posts and also mark this question as answered.
07-26-2015 07:15 PM
07-27-2015 08:21 AM
Hello Brett,
here is the thing :
The current configuration :
dot11 ssid SPI
vlan 2
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
!
dot11 ssid SGAD
vlan 1
authentication open
authentication key-management wpa
mbssid guest-mode
wpa-psk ascii 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
but this output show the guest mode is not enbaled.......................
Router#show dot11 bssid
Interface BSSID Guest SSID
Dot11Radio0 0023.331f.3120 No SPI
Dot11Radio0 0023.331f.3120 No SGAD
The current version which is running at Sulz location is 12.4(15)T10.
(c870-advsecurityk9-mz.124-15.T10.bin)
Is this a bug ?
Thank you,
Jan
07-27-2015 08:32 AM
Hi Jan,
Please forward the following output:-
show run interface dot11radio 0
Please note that you have to also add command mbssid under the radio interface
For ex:-
interface dot11radio 0
mbssid
Do let me know if you have any queries or concerns.
Regards,
Shubham
Don't forget to rate helpful posts and also mark this question as answered.
07-28-2015 01:56 AM
Hello Shubham,
You are right !
There was missing command mbssid under dot11radio 0.
********************************
interface dot11radio 0
mbssid
*******************************
Now, both SSID are visible.
Thank you very much.
Jan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide