cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
211
Views
0
Helpful
1
Replies

cleanAir on AP 2600 FLEX-CONNECT

Augustgood
Beginner
Beginner

Hi to all,

My customer wants implement Cisco CleanAir on AP 2600, from on-line documentation "flex-connect compatibility matrix" i found this  "CleanAir (SI on 3500), what does it mean ? It means that it is only supported on ap 3500 and later ?? or the documentation is not updated ?

 

who can help me?

 

 

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame Guru Hall of Fame Guru
Hall of Fame Guru

SI = Spectrum Intelligence 

if the access point is CleanAir 2xxx and 3xxx models, then you can configure CleanAir. The 1xxx models only support CleanAir express and the new 1850 don't support any CleanAir. 

http://www.cisco.com/c/en/us/solutions/enterprise-networks/cleanair-technology/index.html

if you are looking at any CleanAir guides, the AP's are pressure much interchangeable for exception that the 3xxx has the ability to add a module to the AP.

-Scott

-Scott
*** Please rate helpful posts ***

View solution in original post

1 Reply 1

Scott Fella
Hall of Fame Guru Hall of Fame Guru
Hall of Fame Guru

SI = Spectrum Intelligence 

if the access point is CleanAir 2xxx and 3xxx models, then you can configure CleanAir. The 1xxx models only support CleanAir express and the new 1850 don't support any CleanAir. 

http://www.cisco.com/c/en/us/solutions/enterprise-networks/cleanair-technology/index.html

if you are looking at any CleanAir guides, the AP's are pressure much interchangeable for exception that the 3xxx has the ability to add a module to the AP.

-Scott

-Scott
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers