01-30-2014 10:50 PM - edited 07-05-2021 12:04 AM
Hi All,
We observed all the Nexus 5 model mobiles are not able to connect to Wi-fi network. Any changes on the WLC could help to resolve it ..?
Thanks in advance.
Solved! Go to Solution.
02-02-2014 08:33 PM
Yes Mr. scott!!!
02-02-2014 08:46 PM
Well HA AP SSO wasn't designed for anchor WLC's. This is used for WLC's that have access points joining to them. Redundancy for guest anchoring is done by two licensed WLC with a 12 AP count.
Now I don't think this has anything to do with your issue since you have defined or should I say isolated the issue with a certain device.
Sent from Cisco Technical Support iPhone App
02-03-2014 03:43 AM
Thank you Rasika for your wonderful support in resolving this issue
02-03-2014 09:45 AM
Glad to see it worked for you. Thanks for rating as well
Rasika
01-31-2014 03:27 AM
Yes right AC module not supported on 7.4, it is only supported on 7.5 and later versions.
If you have 7.5.102.0 on both wlcs then you have to run this command.
Reagrds
01-31-2014 04:43 AM
There are open bugs on v7.6 with the 3600's and the 3700's. So your really in a pinch. Your better off staying on v7.5 and adding the command:
config network secureweb cipher-option rc4-preference enable
The open issues with v7.6 is here
https://supportforums.cisco.com/thread/2233768
Your other option is to go with v7.4.121.0 and wait for v7.6 to be fixed, witch will either be a new 7.6.x release of v8.0
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide