cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
441
Views
0
Helpful
5
Replies

Client get wrong IP address on Air 1700 and WLC2504

teera2526
Level 1
Level 1

I have experienced that client get wrong ip when connect to wireless

i have 2 wireless profile 1. internal wlan and guest when client connect to guest they get correct ip but when connect to internal wlan client also get "guest" IP

so i have attached my configuration

 

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame

Check the DHCP IP address of the Dynamic Interface settings for the internal WLAN SSID.

did u mean i have to create dhcp int for internal wlan and guest right?

If you're following the "traditional" method of each SSID is assigned to a specific Dynamic Interface, then yes, each check each of the Dynamic Interface settings and look at the DHCP settings.  Make sure there is a DHCP scope for the two different subnets.

I have attach my scenario setup. The problem is when i move dhcp ip to dhcp server.

on my lab test i have created dhcp on core sw, never problem.

Review Cisco Networking for a $25 gift card