Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- Technology and Support
- Wireless - Mobility
- Wireless
- Re: Clients unable to get an IP address from lightweight APs
Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Mute
- Printer Friendly Page
1644
Views
0
Helpful
6
Replies
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-14-2020 02:44 PM - edited 07-05-2021 11:51 AM
Hello, I am trying to set up some old access points with a WLC 4402 and it's working except that clients don't get IPs when they connect to the AP. So, The controller, as mentioned before, is a WLC4402 and the access point is a 1131 series lightweight. I have gotten as far as setting up the WLAN with security and getting the AP to associate to the WLC but when I try to connect to the network no IP address is given out. My current setup has the WLC and the AP on a 3750g switch, which is connected to a 2851 router ascting as the DHCP server. When I had autonomous APs set up everything worked fine, and all the wired devices get an ip perfectly. It seems to me that it is something with the DHCP server config in the WLC. Here is the config for the WLC:
(Cisco Controller) >show run-config
Press Enter to continue...
System Inventory
Switch Description............................... Cisco Controller
Machine Model.................................... AIR-WLC4402-12-K9
Serial Number.................................... FOC1248F0K1
Burned-in MAC Address............................ 00:21:A0:37:D5:40
Crypto Accelerator 1............................. Absent
Crypto Accelerator 2............................. Absent
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Press Enter to continue Or <Ctl Z> to abort
System Information
Manufacturer's Name.............................. Cisco Systems, Inc
Product Name..................................... Cisco Controller
Product Version.................................. 3.2.150.10
RTOS Version..................................... 3.2.150.10
Bootloader Version............................... 3.2.150.10
Build Type....................................... DATA + WPS
System Name...................................... ProtoStar-WLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.14179.1.1.4.3
IP Address....................................... 192.168.2.30
System Up Time................................... 0 days 0 hrs 26 mins 7 secs
Configured Country............................... United States
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +46 C
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 6
Press Enter to continue Or <Ctl Z> to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
Current LWAPP Transport Mode..................... Layer 3
LWAPP Transport Mode after next switch reboot.... Layer 3
FIPS prerequisite features....................... Disabled
Press Enter to continue Or <Ctl Z> to abort
Network Information
RF-Network Name............................. ProtoStar-RF
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Mode..................... Disable Mode: Ucast
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
ARP Unicast Mode............................ Disabled
Cisco AP Default Master..................... Disable
Mgmt Via Wireless Interface................. Disable
Bridge AP Zero Config....................... Enable
Bridge Shared Secret........................ youshouldsetme
Allow Old Bridging Aps To Authenticate...... Enable
Over The Air Provisioning of AP's........... Enable
Mobile Peer to Peer Blocking................ Disable
Apple Talk ................................. Disable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled
Press Enter to continue Or <Ctl Z> to abort
Port Summary
STP Admin Physical Physical Link Link Mcast
Pr Type Stat Mode Mode Status Status Trap Appliance POE
-- ------- ---- ------- ---------- ---------- ------ ------- --------- -------
1 Normal Forw Enable Auto 1000 Full Up Enable Enable N/A
2 Normal Disa Enable Auto 1000 Full Down Enable Enable N/A
Press Enter to continue Or <Ctl Z> to abort
AP Summary
AP Name Slots AP Model Ethernet MAC Location Port
------------------ ----- ------------------- ----------------- ------------- --- ----
AP0019.555f.c7ea 2 AIR-AP1131AG-A-K9 00:19:55:5f:c7:ea default locat ion 1
Press Enter to continue Or <Ctl Z> to abort
AP Config
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP0019.555f.c7ea
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:19:55:5f:c7:ea
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.2.75
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.2.1
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch.............................
Secondary Cisco Switch...........................
Tertiary Cisco Switch............................
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Remote AP Debug ................................. Disabled
S/W Version .................................... 3.2.150.10
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Number Of Slots.................................. 2
AP Model......................................... AIR-AP1131AG-A-K9
IOS Version...................................... 12.3(7)JX5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1039T0EC
AP Certificate Type.............................. Manufacture Installed
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211g
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
WLAN Override ............................... Disabled
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:19:07:36:d9:f0
Operation Rate Set
1000 Kilo Bits........................... MANDATORY
2000 Kilo Bits........................... MANDATORY
5500 Kilo Bits........................... MANDATORY
11000 Kilo Bits.......................... MANDATORY
6000 Kilo Bits........................... SUPPORTED
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... SUPPORTED
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... SUPPORTED
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
DTIM Period ............................... 1
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 11
MAC Operation Parameters
Configuration ............................. AUTOMATIC
RTS Threshold ............................. 2347
Short Retry Limit ......................... 7
Long Retry Limit .......................... 4
Fragmentation Threshold ................... 2346
Maximum Tx MSDU Life Time ................. 512
Maximum Rx Life Time ...................... 512
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 6
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBm units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP0019.555f.c7ea
AP Regulatory Domain............................. -A
Switch Port Number .............................. 1
MAC Address...................................... 00:19:55:5f:c7:ea
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.2.75
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.2.1
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch.............................
Secondary Cisco Switch...........................
Tertiary Cisco Switch............................
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Remote AP Debug ................................. Disabled
S/W Version .................................... 3.2.150.10
Boot Version ................................... 12.3.8.0
Mini IOS Version ................................ 3.0.51.0
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Number Of Slots.................................. 2
AP Model......................................... AIR-AP1131AG-A-K9
IOS Version...................................... 12.3(7)JX5
Reset Button..................................... Enabled
AP Serial Number................................. FTX1039T0EC
AP Certificate Type.............................. Manufacture Installed
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211a
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
WLAN Override ............................... Disabled
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 00:19:07:36:d9:f0
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
Beacon Period ............................. 100
DTIM Period ............................... 1
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ US
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 4
MAC Operation Parameters
Configuration ............................. AUTOMATIC
RTS Threshold ............................. 2347
Short Retry Limit ......................... 7
Long Retry Limit .......................... 4
Fragmentation Threshold ................... 2346
Maximum Tx MSDU Life Time ................. 512
Maximum Rx Life Time ...................... 512
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 15 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 157
TI Threshold .............................. -50
Antenna Type............................... INTERNAL_ANTENNA
Internal Antenna Gain (in .5 dBm units).... 8
Diversity.................................. DIVERSITY_ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
Press Enter to continue Or <Ctl Z> to abort
AP Airewave Director Configuration
Number Of Slots.................................. 2
AP Name.......................................... AP0019.555f.c7ea
MAC Address...................................... 00:19:55:5f:c7:ea
Radio Type..................................... RADIO_TYPE_80211b/g
Noise Information
Noise Profile................................ PASSED
Channel 1.................................... -95 dBm
Channel 2.................................... -93 dBm
Channel 3.................................... -93 dBm
Channel 4.................................... -93 dBm
Channel 5.................................... -93 dBm
Channel 6.................................... -91 dBm
Channel 7.................................... -94 dBm
Channel 8.................................... -91 dBm
Channel 9.................................... -82 dBm
Channel 10................................... -93 dBm
Channel 11................................... -94 dBm
Interference Information
Interference Profile......................... FAILED
Channel 1.................................... -74 dBm @ 16 % busy
Channel 2.................................... -74 dBm @ 7 % busy
Channel 3.................................... -128 dBm @ 0 % busy
Channel 4.................................... -86 dBm @ 1 % busy
Channel 5.................................... -128 dBm @ 0 % busy
Channel 6.................................... -79 dBm @ 15 % busy
Channel 7.................................... -73 dBm @ 4 % busy
Channel 8.................................... -80 dBm @ 1 % busy
Channel 9.................................... -128 dBm @ 0 % busy
Channel 10................................... -74 dBm @ 5 % busy
Channel 11................................... -81 dBm @ 9 % busy
Load Information
Load Profile................................. PASSED
Receive Utilization.......................... 8 %
Transmit Utilization......................... 1 %
Channel Utilization.......................... 15 %
Attached Clients............................. 0 clients
Coverage Information
Coverage Profile............................. PASSED
Failed Clients............................... 0 clients
Client Signal Strengths
RSSI -100 dbm................................ 0 clients
RSSI -92 dbm................................ 0 clients
RSSI -84 dbm................................ 0 clients
RSSI -76 dbm................................ 0 clients
RSSI -68 dbm................................ 0 clients
RSSI -60 dbm................................ 0 clients
RSSI -52 dbm................................ 0 clients
Client Signal To Noise Ratios
SNR 0 dbm................................. 0 clients
SNR 5 dbm................................. 0 clients
SNR 10 dbm................................. 0 clients
SNR 15 dbm................................. 0 clients
SNR 20 dbm................................. 0 clients
SNR 25 dbm................................. 0 clients
SNR 30 dbm................................. 0 clients
SNR 35 dbm................................. 0 clients
SNR 40 dbm................................. 0 clients
SNR 45 dbm................................. 0 clients
Nearby APs
Radar Information
Channel Assignment Information
Current Channel Average Energy............... unknown
Previous Channel Average Energy.............. unknown
Channel Change Count......................... 0
Last Channel Change Time..................... Sun Mar 14 21:09:20 2010
Recommendd Best Channel...................... 6
RF Parameter Recommendations
Power Level.................................. 1
RTS/CTS Threshold............................ 2347
Fragmentation Tnreshold...................... 2346
Antenna Pattern.............................. 0
Number Of Slots.................................. 2
AP Name.......................................... AP0019.555f.c7ea
MAC Address...................................... 00:19:55:5f:c7:ea
Radio Type..................................... RADIO_TYPE_80211a
Noise Information
Noise Profile................................ PASSED
Channel 36................................... -92 dBm
Channel 40................................... -94 dBm
Channel 44................................... -95 dBm
Channel 48................................... -96 dBm
Channel 52................................... -101 dBm
Channel 56................................... -95 dBm
Channel 60................................... -90 dBm
Channel 64................................... -98 dBm
Channel 149.................................. -94 dBm
Channel 153.................................. -94 dBm
Channel 157.................................. -94 dBm
Channel 161.................................. -91 dBm
Channel 165.................................. -102 dBm
Channel 190.................................. -98 dBm
Interference Information
Interference Profile......................... PASSED
Channel 36................................... -128 dBm @ 0 % busy
Channel 40................................... -128 dBm @ 0 % busy
Channel 44................................... -128 dBm @ 0 % busy
Channel 48................................... -128 dBm @ 0 % busy
Channel 52................................... -128 dBm @ 0 % busy
Channel 56................................... -128 dBm @ 0 % busy
Channel 60................................... -128 dBm @ 0 % busy
Channel 64................................... -128 dBm @ 0 % busy
Channel 149.................................. -128 dBm @ 0 % busy
Channel 153.................................. -128 dBm @ 0 % busy
Channel 157.................................. -128 dBm @ 0 % busy
Channel 161.................................. -128 dBm @ 0 % busy
Channel 165.................................. -128 dBm @ 0 % busy
Channel 190.................................. -128 dBm @ 0 % busy
Load Information
Load Profile................................. PASSED
Receive Utilization.......................... 0 %
Transmit Utilization......................... 0 %
Channel Utilization.......................... 0 %
Attached Clients............................. 0 clients
Coverage Information
Coverage Profile............................. PASSED
Failed Clients............................... 0 clients
Client Signal Strengths
RSSI -100 dbm................................ 0 clients
RSSI -92 dbm................................ 0 clients
RSSI -84 dbm................................ 0 clients
RSSI -76 dbm................................ 0 clients
RSSI -68 dbm................................ 0 clients
RSSI -60 dbm................................ 0 clients
RSSI -52 dbm................................ 0 clients
Client Signal To Noise Ratios
SNR 0 dbm................................. 0 clients
SNR 5 dbm................................. 0 clients
SNR 10 dbm................................. 0 clients
SNR 15 dbm................................. 0 clients
SNR 20 dbm................................. 0 clients
SNR 25 dbm................................. 0 clients
SNR 30 dbm................................. 0 clients
SNR 35 dbm................................. 0 clients
SNR 40 dbm................................. 0 clients
SNR 45 dbm................................. 0 clients
Nearby APs
Radar Information
Channel Assignment Information
Current Channel Average Energy............... unknown
Previous Channel Average Energy.............. unknown
Channel Change Count......................... 0
Last Channel Change Time..................... Sun Mar 14 21:09:20 2010
Recommendd Best Channel...................... 157
RF Parameter Recommendations
Power Level.................................. 1
RTS/CTS Threshold............................ 2347
Fragmentation Tnreshold...................... 2346
Antenna Pattern.............................. 0
Press Enter to continue Or <Ctl Z> to abort
802.11A Configuration
802.11a Network.................................. Enabled
802.11a Low Band........................... Enabled
802.11a Mid Band........................... Enabled
802.11a High Band.......................... Enabled
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 1
DTPC Status..................................... Enabled
DTIM Period...................................... 1
Fragmentation Threshold.......................... 2346
Long Retry Limit................................. 4
Maximum Rx Life Time............................. 512
Max Tx MSDU Life Time............................ 512
Medium Occupancy Limit........................... 100
Pico-Cell Status................................. Disabled
RTS Threshold.................................... 2347
Short Retry Limit................................ 7
TI Threshold..................................... -50
Press Enter to continue Or <Ctl Z> to abort
802.11A Advanced Configuration
AP Name Channel TxPower Level
-------------------------------- ----------- -------------
AP0019.555f.c7ea 157* 1*
Press Enter to continue Or <Ctl Z> to abort
802.11A Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
TxPower Update Logging......................... Off
Default 802.11a AP performance profiles
802.11a Global Interference threshold.......... 10 %
802.11a Global noise threshold................. -70 dBm
802.11a Global RF utilization threshold........ 80 %
802.11a Global throughput threshold............ 1000000 bps
802.11a Global clients threshold............... 12 clients
802.11a Global coverage threshold.............. 16 dB
802.11a Global coverage exception level........ 25 %
802.11a Global client minimum exception lev.... 3 clients
Default 802.11a AP monitoring
802.11a Monitor Mode........................... enable
802.11a Monitor Channels....................... Country channels
802.11a AP Coverage Interval................... 180 seconds
802.11a AP Load Interval....................... 60 seconds
802.11a AP Noise Interval...................... 180 seconds
802.11a AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -65 dBm
Transmit Power Neighbor Count.................. 3 APs
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... 00:21:a0:37:d5:40
Last Run....................................... 367 seconds ago
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
Channel Update Interval........................ 600 seconds
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... 00:21:a0:37:d5:40
Last Run....................................... 367 seconds ago
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... 0 days, 00 h 25 m 53 s
Average...................................... 0 days, 00 h 25 m 53 s
Maximum...................................... 0 days, 00 h 25 m 53 s
Radio RF Grouping
802.11a Group Mode............................. AUTO
802.11a Group Update Interval.................. 600 seconds
802.11a Group Leader........................... 00:21:a0:37:d5:40
802.11a Group Member......................... 00:21:a0:37:d5:40
802.11a Last Run............................... 367 seconds ago
Press Enter to continue Or <Ctl Z> to abort
802.11B Configuration
802.11b Network.................................. Enabled
11gSupport....................................... Enabled
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Mandatory
802.11b/g 2M Rate............................ Mandatory
802.11b/g 5.5M Rate.......................... Mandatory
802.11b/g 11M Rate........................... Mandatory
802.11g 6M Rate.............................. Supported
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Supported
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
Beacon Interval.................................. 100
CF Pollable mode................................. Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 1
Default Tx Power Level........................... 1
DTPC Status..................................... Enabled
Call Admission Limit ........................... 105
G711 CU Quantum ................................. 15
DTIM Period...................................... 1
ED Threshold..................................... -50
Fragmentation Threshold.......................... 2346
Long Retry Limit................................. 4
Maximum Rx Life Time............................. 512
Max Tx MSDU Life Time............................ 512
Medium Occupancy Limit........................... 100
PBCC mandatory................................... Disabled
Pico-Cell Status................................. Disabled
RTS Threshold.................................... 2347
Short Preamble mandatory......................... Enabled
Short Retry Limit................................ 7
Press Enter to continue Or <Ctl Z> to abort
802.11B Advanced Configuration
AP Name Channel TxPower Level
-------------------------------- ----------- -------------
AP0019.555f.c7ea 6* 1*
Press Enter to continue Or <Ctl Z> to abort
802.11B Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
Transmit Power Update Logging.................. Off
Default 802.11b AP performance profiles
802.11b Global Interference threshold.......... 10 %
802.11b Global noise threshold................. -70 dBm
802.11b Global RF utilization threshold........ 80 %
802.11b Global throughput threshold............ 1000000 bps
802.11b Global clients threshold............... 12 clients
802.11b Global coverage threshold.............. 12 dB
802.11b Global coverage exception level........ 25 %
802.11b Global client minimum exception lev.... 3 clients
Default 802.11b AP monitoring
802.11b Monitor Mode........................... enable
802.11b Monitor Channels....................... Country channels
802.11b AP Coverage Interval................... 180 seconds
802.11b AP Load Interval....................... 60 seconds
802.11b AP Noise Interval...................... 180 seconds
802.11b AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -65 dBm
Transmit Power Neighbor Count.................. 3 APs
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... 00:21:a0:37:d5:40
Last Run....................................... 375 seconds ago
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
Channel Update Interval........................ 600 seconds
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... 00:21:a0:37:d5:40
Last Run....................................... 375 seconds ago
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... 0 days, 00 h 26 m 01 s
Average...................................... 0 days, 00 h 26 m 01 s
Maximum...................................... 0 days, 00 h 26 m 01 s
Radio RF Grouping
802.11b Group Mode............................. AUTO
802.11b Group Update Interval.................. 600 seconds
802.11b Group Leader........................... 00:21:a0:37:d5:40
802.11b Group Member......................... 00:21:a0:37:d5:40
802.11b Last Run............................... 375 seconds ago
Press Enter to continue Or <Ctl Z> to abort
Mobility Configuration
Mobility Protocol Port........................... 16666
Mobility Security Mode........................... Disabled
Default Mobility Domain.......................... ProtoStar-RF
Mobility Group members configured................ 1
Switches configured in the Mobility Group
MAC Address IP Address Group Name
00:21:a0:37:d5:40 192.168.2.30 <local>
Press Enter to continue Or <Ctl Z> to abort
Interface Configuration
Interface Name................................... ap-manager
IP Address....................................... 192.168.2.70
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 192.168.2.1
VLAN............................................. untagged
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Interface Name................................... management
MAC Address...................................... 00:21:a0:37:d5:40
IP Address....................................... 192.168.2.30
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 192.168.2.1
VLAN............................................. untagged
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. Unconfigured
Secondary DHCP Server............................ Unconfigured
ACL.............................................. Unconfigured
AP Manager....................................... No
Interface Name................................... service-port
MAC Address...................................... 00:21:a0:37:d5:41
IP Address....................................... 0.0.0.0
DHCP Protocol.................................... Disabled
AP Manager....................................... No
Interface Name................................... virtual
IP Address....................................... 1.1.1.1
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Press Enter to continue Or <Ctl Z> to abort
WLAN Configuration
WLAN Identifier.................................. 1
Network Name (SSID).............................. ProtoStar-Systems
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
Interface........................................ management
WLAN ACL......................................... unconfigured
DHCP Server...................................... Default
Quality of Service............................... Silver (best effort)
WMM.............................................. Disabled
802.11e.......................................... Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Radio Policy..................................... All
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Enabled
Encryption:..................................... None
Wi-Fi Protected Access (WPA1)................. Disabled
Wi-Fi Protected Access v2 (WPA2).............. Disabled
IP Security................................... Disabled
IP Security Passthru.......................... Disabled
L2TP.......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Auto Anchor................................... Disabled
Cranite Passthru.............................. Disabled
Fortress Passthru............................. Disabled
Press Enter to continue Or <Ctl Z> to abort
ACL Configuration
Press Enter to continue Or <Ctl Z> to abort
RADIUS Configuration
Vendor Id Backward Compatibility................. Disabled
Credentials Caching.............................. Disabled
Call Station Id Type............................. IP Address
Administrative Authentication via RADIUS......... Enabled
Keywrap.......................................... Disabled
Authentication Servers
Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/Phase1/Group/Lifetime/Auth/Encr
--- ---- ---------------- ------ -------- ---- ------- ------------------------------------------------
Accounting Servers
Index Type Server Address Port State Tout RFC-3576 IPSec - AuthMode/Phase1/Group/Lifetime/Auth/Encr
----- ---- ---------------- ------ -------- ---- -------- ------------------------------------------------
Press Enter to continue Or <Ctl Z> to abort
Route Info
Number of Routes................................. 0
Destination Network Genmask Gateway
------------------- ------------------- -------------------
Press Enter to continue Or <Ctl Z> to abort
Qos Queue Length Info
Platinum queue length............................ 100
Gold queue length................................ 75
Silver queue length.............................. 50
Bronze queue length.............................. 25
Press Enter to continue Or <Ctl Z> to abort
Mac Filter Info
Press Enter to continue Or <Ctl Z> to abort
Load Balancing Info
Aggressive Load Balancing........................ Enabled
Aggressive Load Balancing Window................. 0 clients
Press Enter to continue Or <Ctl Z> to abort
Dhcp Scope Info
Press Enter to continue Or <Ctl Z> to abort
Exclusion List ConfigurationUnable to retrieve exclusion-list entry
Press Enter to continue Or <Ctl Z> to abort
WPS Configuration Summary
Client Exclusion Policy
Excessive 802.11-association failures.......... Enabled
Excessive 802.11-authentication failures....... Enabled
Excessive 802.1x-authentication................ Enabled
IP-theft....................................... Enabled
Excessive Web authentication failure........... Enabled
Trusted AP Policy
Mis-configured AP Action....................... Alarm Only
Enforced encryption policy................... none
Enforced preamble policy..................... none
Enforced radio type policy................... none
Validate SSID................................ Disabled
Alert if Trusted AP is missing................. Disabled
Trusted AP timeout............................. 120
Untrusted AP Policy
Rogue Location Discovery Protocol.............. Disabled
RLDP Action.................................. Alarm Only
Rogue APs
Rogues AP advertising my SSID................ Alarm Only
Detect and report Ad-Hoc Networks............ Enabled
Rogue Clients
Validate rogue clients against AAA........... Disabled
Detect trusted clients on rogue APs.......... Alarm Only
Rogue AP timeout............................... 1200
Signature Policy
Signature Processing........................... Enabled
Press Enter to continue Or <Ctl Z> to abort
Spanning Tree Switch Configuration
STP Specification...................... IEEE 802.1D
STP Base MAC Address................... 00:21:A0:37:D5:40
Spanning Tree Algorithm................ Disable
STP Bridge Priority.................... 32768
STP Bridge Max. Age (seconds).......... 20
STP Bridge Hello Time (seconds)........ 2
STP Bridge Forward Delay (seconds)..... 15
Press Enter to continue Or <Ctl Z> to abort
Spanning Tree Port Configuration
STP Port ID................................. 8001
STP Port State.............................. Forwarding
STP Port Administrative Mode................ 802.1D
STP Port Priority........................... 128
STP Port Path Cost.......................... 4
STP Port Path Cost Mode..................... Auto
STP Port ID................................. 8002
STP Port State.............................. Disabled
STP Port Administrative Mode................ 802.1D
STP Port Priority........................... 128
STP Port Path Cost.......................... 4
STP Port Path Cost Mode..................... Auto
(Cisco Controller) >So far I have tried setting the DHCP server in the management and ap-manager interfaces to my router (192.168.2.1) and I have tries setting the override setting in WLAN config to the router. I can't seem to wrap my head around this, I have only really worked with the old autonomous access points until now. I think someone here will be able to figure it out.
Thanks, Keith
Solved! Go to Solution.
Labels:
- Labels:
-
Wireless LAN Controller
1 Accepted Solution
Accepted Solutions
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2020 09:16 AM
Hi,
Configure the DHCP server IP address (the router) on your WLC interface with the IP address of "192.168.2.30". With these legacy devices, i guess you're not using FlexConnect; not sure if you have some security features on the switch side. Configure the WLC to work as a relay, but in "bridging mode", not "proxy mode".
Regards,
Cristian Matei.
6 Replies 6
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-14-2020 04:56 PM
Wow! 3.2.X.X firmware.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2020 03:27 PM
Now that you mention it, I realized just how old this WLC is. Does Cisco still have the newer firmware available?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2020 04:36 PM
Last firmware support for the 4400 is 7.0.X.X, however, it is going to be a painful exercise to upgrade.
It is not possible to upgrade from 3.X.X.X to 7.0.X.X directly. There needs to be a "collection" of intermediate firmware to jump from one version to another until 7.0.X.X is reached.
And because the 4400 is very, very old, Cisco is no longer hosting the files. The only place to find those firmware is to go through the web.
It is not possible to upgrade from 3.X.X.X to 7.0.X.X directly. There needs to be a "collection" of intermediate firmware to jump from one version to another until 7.0.X.X is reached.
And because the 4400 is very, very old, Cisco is no longer hosting the files. The only place to find those firmware is to go through the web.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-16-2020 09:06 AM
Alright, thanks for the info.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2020 09:16 AM
Hi,
Configure the DHCP server IP address (the router) on your WLC interface with the IP address of "192.168.2.30". With these legacy devices, i guess you're not using FlexConnect; not sure if you have some security features on the switch side. Configure the WLC to work as a relay, but in "bridging mode", not "proxy mode".
Regards,
Cristian Matei.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
03-15-2020 03:28 PM
Solved! That did the trick, thank you so much.
Learn, share, save
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Customers Also Viewed These Support Documents
