Command to check active radius server in the pool

[jeen_wifi]

Hi,

Is there a command on WLC to check the current active radius server in the list?

I have configured multiple radius servers and noticed in the logs the radius servers were often deactived and activated. I would like to see which is the current active radius server for a WLAN.

Thanks

[Scott Fella]

There isn't a command to check. You could enable fallback or just see the log on which server was the last one to be deactivated.

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008098987e.shtml

Sent from Cisco Technical Support iPhone App