Compaitbility wlc / prime infrastructure

[salilai01]

Does prime infrastructure1.2 compatible with wlc 7.2.115.2 ?    

From cisco compatibility matrix I found this: 

       

but nothing about wlc 7.2.115.2 and prime infrastructure 1.2

[Scott Fella]

Yes that should be fine since it support newer code than that.

Sent from Cisco Technical Support iPhone App

[salilai01]

Did you find a cisco documentation which confirm it?

[Scott Fella]

Look at the matrix and see what the highest code train is supported. That means that any version is supported between 7.x and 7.x

Sent from Cisco Technical Support iPhone App

[salilai01]

sorry, I don't understan. I've checked this website http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html

[Scott Fella]

For PI 1.2, the lowest code supported is 7.0.98.0... the latest code supported is 7.3.101.0... so any code between that will work.  If you are worried that since its not listed, that its not supported, you can either open a TAC case of upgrade your WLC to a version that is on the chart.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[Abhishek Abhishek]

Hello,

As per your query i can suggest you the following solution-

Yes, prime infrastructure1.2 compatible with wlc 7.2.115.2 will work.

Hope this will help you.

[salilai01]

thanks

[manjeets]

Kindly review the attached complete compatable devices matrix..