11-08-2002 11:32 AM - edited 07-04-2021 11:30 PM
It seems there is a problem between the ethernet port of a 350 series wireless bridge and the ethernet port of a 4005 3com switch.
Symptoms:
when you just connect them one to another, they work just fine, but after a while, maybe 4 hours, maybe 1 or 2 days, the ethernet port on the bridge just blocks!... eventhough the link is up, no data passes through. I've been solving this problem, unplugging and plugging again the cable, but it's just a quick solution, cause it happens again after 3 or 4 hrs.
ANY IDEAS!!!???
thanks
11-08-2002 05:32 PM
Could this be a spanning tree problem? I'm not familiar with 3com, but is there anyway to turn off spanning tree for that port?
12-10-2002 01:27 PM
Try to set the Ethernet port in the switch to half duplex and set the speed to 10 Mbps with no autosense, this can be useful.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide