Solved: Compatible for AP Aironet 2702E-E-K9

lonton16 · ‎04-28-2022

Hi, I would like to ask if our current AP Aironet 2702E-E-K9 can work with wifi controller Catalist 9800-40 series?

We intend to upgrade our wifi controller but don't want to waste the old AP.

If not, please recommend me the latest model of wifi controller that support our current AP.

Thanks and best regards!

Flavio Miranda · ‎04-28-2022

Hi

It does, with Cisco IOS XE Amsterdam 17.3.x

You can check on the link below.

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

View solution in original post

Flavio Miranda · ‎04-28-2022

Hi

It does, with Cisco IOS XE Amsterdam 17.3.x

You can check on the link below.

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Rich R · ‎05-05-2022

But be aware that 17.3.x is the last supported release train for the Wave 1 APs so you'll have to replace them before you can upgrade to anything beyond 17.3.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390