02-14-2013 08:37 PM - edited 07-03-2021 11:32 PM
Current configuration : 1451 bytes
!
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname access
!
enable secret 5 $1$bqGr$8ILGI8K7upAYvse3zjlTJ.
!
ip subnet-zero
!
!
no aaa new-model
!
dot11 ssid Test
!
!
!
username Cisco password 7 1531021F0725
username nihilent privilege 15 password 7 130B1E1A020001243F757A6061
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
no shutdown
!
encryption key 1 size 128bit 0 123456789123456789123456789 transmit-key
encryption mode wep mandatory
!
ssid Test
!
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.
54.0
station-role root
antenna receive right
antenna transmit right
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 10.1.1.2 255.255.255.0
no ip route-cache
!
ip default-gateway 10.1.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/he
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
password 7 05050F0728404B070D5445415F4C
login local
!
end
--------------------------------
I am entering SSID as Test
and key as
123456789123456789123456789
02-15-2013 03:55 AM
Under the dot11 SSID Test. Add the following:
Authentication open
Sent from Cisco Technical Support iPhone App
02-15-2013 06:09 AM
Thanks,
It is not working Via CLI.
Reconguired using GUI worked fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide