configure cisco jabber for windows on cme for a user who has already ip cisco configured

[amralrazzaz]

dear 

how to configure cisco jabber for windows or android or iphone for a client how has already ip cisco phone already configured for him under his name 

so can i mirror his ip phone information on cisco jabber to be the same info for both so he can use ip phone cisco or cisco jabber on windows or iphone

here you are the configuration for a client

voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
fax protocol pass-through g711ulaw
h323
sip
registrar server

voice register global
mode cme
source-address 192.168.2.207 port 5060
max-dn 64
max-pool 58
load 7821 sip78xx.10-1-1-9.loads
timezone 25
time-format 24
date-format D/M/Y
tftp-path flash:
create profile sync 0000212587445946
network-locale GB

voice register dn 5
number 100
name Inas AlMahalawi
label Inas AlMahalawi
mwi

voice register pool 5
busy-trigger-per-button 1
id mac 5067.AE21.4E6E
type 7821
number 1 dn 5
cor incoming mobile-long default
presence call-list
dtmf-relay rtp-nte
codec g711ulaw

thanks

regards

[amralrazzaz]

need to create cisco jabber for ip cisco phone already configured and registered for client as show configurations above 

thanks

regards

[amralrazzaz]

there is no way to configure cisco jabber for already configured ip cisco phone to client using cme on router????

just mirroring the ip cisco phone configurations to cisco jabber for windows or smart phone(andriod -ios) to be using by client?

[Manish Mathur · Accepted solution]

Hi Amr,

I think you should post the same question under the Voice communities to get an answer. You may not get a faster resolution on this community as this is primarily for wireless.

Cheers,

Manish