09-18-2013 12:29 PM - edited 07-04-2021 12:52 AM
Good Day to All,
Recently my small elementary schools have upgraded to Cisco Air-Cap2600 series AP's and a 2504 WLC. Very much a sweet step up from 10 year old Apple Airport Extremes.
My question is what would be the best pratice to enable Multicast via the GUI for the needs of those platforms and any other future P2P services?
Thanks in advance from a newbie,
GEP
09-18-2013 12:42 PM
09-18-2013 12:43 PM
Thanks for the info...
09-18-2013 01:31 PM
What is the WLC software version running on your 2504 ?
If it is 7.4.x follow the below reference guide
http://www.cisco.com/en/US/docs/wireless/technology/bonjour/Bonjour_Deployment.html
If it is 7.5.x following config guide should help
http://www.cisco.com/en/US/docs/wireless/controller/7.5/config_guide/b_cg75_chapter_01011.html
HTH
Rasika
09-18-2013 01:41 PM
Hi Rasika,
It has 7.5.102.0 onboard for software. Thanks for the quick response to my query.
Gary
09-18-2013 01:45 PM
No worries, hope it will help you to configure multicast/mDNS on your setup
Pls rate the response if it was useful
Rasika
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide