03-10-2015 03:33 PM - edited 07-05-2021 02:40 AM
Hi all,
I am new to Wireless tech, i have two WLC 5760 controller one for redudancy.
What are the configuration i need to done,please advice me.
03-10-2015 03:56 PM
Duplicate post.
Go HERE.
03-16-2015 02:26 AM
05-05-2015 08:08 AM
Hello Shiva,
Pls check the below link as it will give you a very basic configuration required on 5760 .
http://mrncciew.com/2013/12/12/getting-started-with-5760/
Here is some other best practices when configuring 5760
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_IOS_WLC_Configuration_Best_Practices.html
Pls check the below link as it will give you a very basic configuration required on 5760 to get it start.
http://mrncciew.com/2013/12/12/getting-started-with-5760/
Here is some other best practices when configuring 5760
- See more at: https://supportforums.cisco.com/discussion/12448451/wlc-5760#sthash.jqvko2r0.dpuf05-05-2015 02:43 PM
Please go through the below link :
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/ConvergedAccessDG3_2_2.html#pgfId-43851
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Please refer to the link-
https://supportforums.cisco.com/document/146996/getting-started-wlc-5760-and-3850