Connecting Redundancy Port between two WLC 5508

[Mario Andres Proano Navas]

Hello everyone

I need your help in order to confirm what cable type I should connect between WLC 5508 redundancy ports, this one must be cross over cable or straight through cable?

Thanks in advance

[Stephen Rodriguez · Accepted solution]

a standard ethernet cable, so straight through

http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01110100.html

--

HTH,

Steve