cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
140
Views
1
Helpful
4
Replies

Connection serial to AP 3802

Odbayar
Level 1
Level 1

I need some help connecting AP3802.
I am using a serial cable and putty.
Speed:9600
Data bits: 8
Stop bits:1
I have tried every speed. The result is the same. Please help me

Odbayar_0-1736996358548.png

 

1 Accepted Solution

Accepted Solutions

Odbayar
Level 1
Level 1

USB to serial is not working. Directly serial connection working fine.

View solution in original post

4 Replies 4

Leo Laohoo
Hall of Fame
Hall of Fame

If the AP is on 17.15.X, the baud rate needs to be changed to 115200.

I have tried 110, 300, 600, 1200, 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 230400, 460800, 921600.

Odbayar
Level 1
Level 1

USB to serial is not working. Directly serial connection working fine.

Rich R
VIP
VIP

Cisco APs are very "fussy" with console cables. Before buying a cable always check the reviews to make sure they work with Cisco APs.  Even if they work with Cisco routers and switches does not mean they will work with APs.  Generally cables based on genuine (not counterfeit) FTDI chipset will work.

Review Cisco Networking for a $25 gift card