02-26-2010 11:09 AM - edited 07-03-2021 06:33 PM
Q:
I’ve the 1140 AP (LAP) flavor; can I convert it to Standalone access points?
If yes can you please explain how and if you have documentation that will be great.
Thank you all for reading and helping.
02-26-2010 03:44 PM
You can convert the AP from autonomous AP (aAP) to light-weight AP (LWAP) and vice versa. It all boils down to the IOS you run.
If you have a WLC, ollow the proceedure below: Using a Wireless LAN Controller to Return to a Previous Releasehttp://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689
If you don't have a WLC, follow the proceedure below: Using a Wireless LAN Controller to Return to a Previous Releasehttp://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp157689
If you find my post helpful, please do not hesistate to rate. Thank you very much.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community