Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I have some questions if you can help me out please.1-Just need to understand the difference between configuring port-channel mac-pinning Vs port-channel LACP on the Nexus1000v? what do i gain or loose by having one versus the other?2-when conf...
Team,do you see any issue with 2 different Nexus1000v switches connected to the same vCenterone location which has the vCenter will be connected to the VSM over L2and the other site the VSM will be connected over L3thanks in advance.
Hello Everyone,Please need your valuable feedback regarding Nexus1000v design. please see attached digram.Will be using standalone server with 2 dual 10G to dual Nexus7000 for VM traffic, but using 1G connection for Nexus1000v management, vMotion but...
Robert,thank you so much for the great information.i have one more question for you please.I am going to change the vmnic port-profile from Mac-pining to LACPwhen doing the changes what do you recommend? can you think of any possible issue ?can i jus...
sachthakthank you for the reply. so just want to make sure.with the new code there's no need to setup veth l3 control with l3 capabilitybut under the svs-domain the svs mode should be specified as L3
Gentlemen,Thank you so much for the info. great help.if you don't mind i have one more question regarding the Nexus1000v with 10Gi am using the attached PDF as a guideline.I have 4/10G uplink to 2 different Nexus7000 (configured with vPC)my questions...
Robert,thank you so much for your help.1-the choice of having dedicated 1G for vMotion wasn't mine. I totally agree with you regarding using the 10G and to put a cap on the vMotion traffic as you mentioned.2-the Service Console/VMkernel management t...
