02-23-2021 12:53 PM - edited 07-05-2021 01:16 PM
Hello All
I hope you are well
Please, I have an access point model AIR-AP1832I-E-K9 and given that I don't have a WLC I want to convert it into a mobility express version in order to use it as a standard access point.
I don't know which version I install of the two versions shown in the images below can you help me.
Thank you indvance.
Regards.
Solved! Go to Solution.
02-24-2021 01:05 AM
The first file requires for the ME conversion, 2nd file is for AP images for ME, if you registering other APs on to that ME master AP. Refer to the below guide for more details
HTH
Rasika
*** Pls rate all useful responses ***
02-24-2021 01:05 AM
The first file requires for the ME conversion, 2nd file is for AP images for ME, if you registering other APs on to that ME master AP. Refer to the below guide for more details
HTH
Rasika
*** Pls rate all useful responses ***
02-24-2021 06:04 AM - edited 02-24-2021 08:05 AM
Hello Rasika
Thank you for your return and information
I want to use it as an access point and a WLC
From what I understood to convert the AP it is necessary to use the .tar file.
otherwise to use it as an AP and WLC you need something else or not ?
Thank you indvance.
Regards.
02-24-2021 10:20 AM
Once you convert to ME, it will act as WLC+AP, so what you require is using that .tar file to convert AP to ME mode
HTH
Rasika
02-25-2021 07:06 AM
Hello Rasika
Thank you for your return and information
Do I need to install another firmware after conversion or not?
Regards.
02-28-2021 03:08 PM
Hi mnehar,
no firmware needed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide