Convert AP 1310 to Autonomous AP

[sudeesh79]

Hi all,

I have few 1310 LWAPP access points.I don't have any  WLC and I want to convert it to autonomous AP.

Please advise me how to convert 1310 AP to autonomous AP if anyone knows.

Thanks

Sudeesh

[Mark Elsen]

https://community.cisco.com/t5/other-wireless-mobility-subjects/converting-cisco-1310-from-lap-to-autonomous/td-p/1312401

M.

[sudeesh79]

Hi Marce,

Thanks for your quick reply, In the link you sent me mentions converting the AP with the WLC.

I don't have any Controller with me.Could you suggest the steps how to convert the 1310 AP to autonomous without

Controller.

Thanks

Sudeesh

[Haydn Andrews]

If you follow my guide up to AP Configuration from my blog post https://thewlan.com.au/2016/09/27/configuring-a-cisco-ap-for-site-survey/, it will show you how to convert the AP to autonomous mode without a WLC.

You will need to obtain the autonomous image for the AP model first from Cisco.com, and there might be some support/licencing requirements to do this.

If you get stuck please share a copy of the console log from when you were following the steps in my blog to help identify any issues

Haydn

[balaji.bandi]

One of the good blog, i recomend to read is here for your requirement :

https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/