07-02-2013 04:50 AM - edited 07-04-2021 12:19 AM
Hi all,
how can I convert a 3602 AP from CAPWAP to IOS from Survey Purpose?
Thanks
Willem
Solved! Go to Solution.
07-02-2013 04:52 AM
Pretty simple... here are some links and videos on how to do that:
https://supportforums.cisco.com/docs/DOC-18268
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
07-02-2013 04:52 AM
Pretty simple... here are some links and videos on how to do that:
https://supportforums.cisco.com/docs/DOC-18268
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
07-02-2013 11:25 PM
Hi All,
I got it to work this way:
I used this Link:
Used this DHCP Server : http://www.dhcpserver.de/dhcpsrv.htm
DHCP Server set to LAN port on Laptop, with one Address
LAN Port Laptop connected to LAN Port AP
Used 3CDaemon as TFTP Server
For my 3602i AP I used this Image (without renaming)
ap3g2-k9w7-tar.152-2.JB.tar
Now the next step is to set this AP for Site Survey.
07-03-2013 04:15 AM
Glad you got it converted.
Sent from Cisco Technical Support iPhone App
07-02-2013 06:59 PM
This process was a pita for me.
Unless you can join it to a controller the archive download-sw command didn't work because the AP keep reDHCPing in the middle of the download.
If you can run the command while it is joined to a controller that is the best.
If not you may need to do it the hard way
https://supportforums.cisco.com/docs/DOC-14636
Long read on my issues with this process.
https://supportforums.cisco.com/message/3829516#3829516
CCNP - Wireless
CWNA and CWAP
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide