02-04-2015 02:50 AM - edited 07-05-2021 02:25 AM
Hi Team
I have an urgent question , my customer wants buy a couple of CT5508 in HA Cluster in Central Site, t he rest of remote sites would have controlled Aps
The question is In the case of lost connectivity wan lines, What´s the end users issue?
I mean, end users will be supported by wireless services locally by remote APs or not? new end users would attach to APs or not?
Regards.
02-04-2015 04:19 AM
Hi..You can use HREAP/Flexconnect Solution
In this method there is a mode in whihc you can use local switching(mean once you lost the connection from Centrel site your remote AP will still provide the Wireless access and they will mapped to local vlans)
Check this docs:
H-Reap Design and Deployment Guide
http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/71250-h-reap-design-deploy.html
H-REAP Modes of Operation Configuration Example
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81680-hreap-modes.html
Regards
Don't forget to rate helpful posts
02-04-2015 04:43 AM
Ok thanks
and in this case too:
Lost the wan connection using the H-Reap but the remote access point is reloaded by electric power issue
What´ll happen it?
Regards
02-04-2015 04:57 AM
Depends which mode you configured:
Yes it can provide the connection even in the case of reboot.
Just read once these types of mode: http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/81680-hreap-modes.html#cl
Regards
Don't forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide