Deployment a Guest WLAN

[Daniel Ordóñez Flores]

Hello guys, thanks for everyone I have another questions I'm going to deploy a new guest WLAN I'm working with the addressing and one questions come to me.. I have this central site and I have some remote offices this new WLAN will be available in different sites so... what is the best option... have just one segment for this WLAN or have different addressing for site? and the most important part... is this posible? I mean one WLAN can has differente Addressing between sites? 

[Daniel Ordóñez Flores]

Ok Let me try to explain.

For this SSID I created on my WLC one interface the addressing is: 10.10.20.2/24 This WLC is in my central site.

In my central site I have too one 3750 Switch this Switch has and SVI "20" and his adressing is 10.10.20.1. This Switch is working as DHCP Server.

In my remote site I have already my AP's on Flex-Connected mode and my users (in this case me) I can see the SSID FERROMEX. I'm joined to FERROMEX SSID and I have Internet services. My question was because I'm not using any ACL and everything looks fine. I guess I need to use ACL this type of connection.

One questions is possible that one SSID with same scheme have different addressgin in every location?

For Example:

My QH in en L.A here reside my WLC and I have one SSID "AMERICA" the adressing is 10.10.10.0 /24

one Branch Office is in NY this office can see the SSID "AMERICA" they can use a diferrente addresing?

[Abhishek Abhishek]

Hello Daniel,

As per your query i can suggest you the following solution-

Yes, you can have one WLAN can has different Addressing between sites using Flex-connect>previously it was known as h-reap.

For more information please refer to the link-

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html

Hope this will help you.