cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
275
Views
5
Helpful
3
Replies
r.sagredo
Beginner

dhcp for User in flex mode.

hi all, we are installing aps on wlc with flex-connect mode. have some doubts about the dhcp for wireless users. can the WLC in flex model work as dhcp? or whenever the dhcp for wireless users must be out of wlc? thanks to all
3 REPLIES 3
Stephen Rodriguez
Cisco Employee

No, you'll want to configure an ip-helper address at L3 and point to your normal DHCP server for the FlexConnect Users

 

HTH,

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

Tranks Steve,

then users can use flex-connect the WLC as DHCP? ... is advisable to do that?..

 

Tranks

 

Moin Ilyas
Enthusiast

Figure 15-1 FlexConnect Deployment

 

That's a typical FlexConnect Deployment. The DHCP Server is advised to be at the Remote Site in a Typical Deployment.
Please refer the following link for more details.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_flexconnect.html
Hope that helps.
Create
Recognize Your Peers
Content for Community-Ad