Solved: DHCP on 5508 for APs

MaximeCH · ‎02-28-2024

Hi all !

I have a CISCO 5508 and i want to make a DHCP only for my AP not for client is it possible on this controler ?
Actually my AP get network information from my DHCP server and i don't wan't to see my AP with my client on this same network.
I don't find anything or i don't search at the right place maybe ^^

Thanks !

marce1000 · ‎02-28-2024

>...and i don't wan't to see my AP with my client on this same network.
Put the clients in another subnet (VLAN) , separating them from the subnet allocated for APs

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎02-28-2024

>...and i don't wan't to see my AP with my client on this same network.
Put the clients in another subnet (VLAN) , separating them from the subnet allocated for APs

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R · ‎02-28-2024

As Marce says keeping APs and clients on separate VLANs is best practice. Remember the APs must be on the native VLAN while client data can be tagged for local switching or centrally switched on the WLC.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

MaximeCH · ‎02-29-2024

Yes i think i do that.

Thank you for your time and your response !