DHCP through WGB

[descalante2007]

I have an 1310 AP set as WGB to access an LWAPP wireless network with 1242 APs. My first tests are ok, but only if I set fixed IP address to the 1310 and the wired pc behind it. Is it the normal behavior or I should receive IP addresses from my regular DHCP server (router 2851)?

Thanks in advance.

Daniel Escalante

[gamccall]

I've successfully had DHCP working for WGB wired clients, but it's been long enough ago that I don't remember any unusual details about the config.

Also, this was in an IOS environment- I've never tried associating a WGB to an LWAPP WLAN.

For reference, here's the Cisco config notes for a WGB on an LWAPP WLAN. (It doesn't say anything about DHCP one way or the other.) http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080905cea.shtml