12-19-2013 09:16 AM - edited 07-04-2021 01:27 AM
12-19-2013 09:48 AM
Try this & see
AAP1(config)#led display ?
dim Turn LED display dim.
off Turn LED display off.
HTH
Rasika
**** Pls rate all useful responses *****
12-19-2013 09:48 AM
Try this & see
AAP1(config)#led display ?
dim Turn LED display dim.
off Turn LED display off.
HTH
Rasika
**** Pls rate all useful responses *****
12-23-2013 11:00 AM
Thanks for your request
This command apply for Cisco Access-Point 2602 but Do you know the command for Cisco Access-Point 3602e.
I tried apply this command and not work
Regards.
12-23-2013 01:09 PM
Does this 3602e is in Autonomous mode as well or is it managed by a WLC ?
If it is manged by WLC you have to do this via WLC
(WLC) >config ap led-state disable
If it is autonomous mode, let me know the code version to check & see
HTH
Rasika
**** Pls rate all useful responses ****
12-23-2013 02:52 PM
All access-point are 2602e but had different IOS version. The command LED DISPLAY OFF is correct, but depend of IOS version.
Regards.
07-09-2021 10:44 PM
Hi, could you indicate the command to turn off the led on Cisco AIR-SAP2602I-A-K9 IOS Software, C3600 Software (AP3G2-K9W7-M), Version 15.2(2)JA, RELEASE SOFTWARE (fc1)? Thanks in advance.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide