05-06-2011 09:30 PM - edited 07-03-2021 08:10 PM
Dear experts!
I see that Cisco LAP 1240 support Mesh mode, but I am not sure if LAP 1250 support or not? I can't find any document that say about this.
Best Regards!
Solved! Go to Solution.
05-06-2011 09:57 PM
Hi,
Depends on the WLC software that you are using!! if you are running the latest 7.0.116 then the Indoor mesh is supported using 1250 series APs..
With the 7.0.116.0 release, the mesh functionality is added in the Cisco Aironet 1040, 1140, 1250, 1260, 1520, and 3500 series indoor access points. The mesh backhaul radio supports the 802.11n data rate. When operating in mesh mode, their mesh backhaul will support both the 802.11a and 802.11n data rate.
Lemme know this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra
05-06-2011 09:57 PM
Hi,
Depends on the WLC software that you are using!! if you are running the latest 7.0.116 then the Indoor mesh is supported using 1250 series APs..
With the 7.0.116.0 release, the mesh functionality is added in the Cisco Aironet 1040, 1140, 1250, 1260, 1520, and 3500 series indoor access points. The mesh backhaul radio supports the 802.11n data rate. When operating in mesh mode, their mesh backhaul will support both the 802.11a and 802.11n data rate.
Lemme know this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra
05-07-2011 12:16 AM
Hi Surendra!,
Thanks for your useful information so much
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide