don't see any rogue ap with cisco AP 1522

[logostech]

Hi,

      I'm not able to detect any rogue ap using 1522AG ap.

The ap are in bridge mode (not able to change this operational mode) and rogue detection is enabled on the ap.

Waiting for any hints ...

Thanks, luigi cacco.

[Nicolas Darchis]

If the mesh AP is servicing client, it won't detect rogue APs as far as I remember. The 152x APs don't do off-channel scanning when they are servicing clients.

[logostech]

Hi Nicolas,

                  we have 39 1522 ap and 13 1142 ap and only some of them are servicing clients, but all of the 1522 aps dosn't see any rough ap.

I think the problem is something else.

Any ideas ?

Thanks.

[Nicolas Darchis]

My info were outdated. The 1522 can detect rogue in recent software version. But :

CSCtn50893   1520 Stopped Detecting Rogues

"

4402 7.0.98.

1522's are in a college environment and typically report hundreds of rogue ap's.

Without any changes, the 1522's stopped detecting and reporting rogue ap's.

The customer has toggled the IDS(Rogue and Signature Detection) value,
rebooted controller, still doesn't work.

1142's associated to the same controller have always and continue to detect and report rogue ap's.

"

Fixed in 7.0.116

[logostech]

It works, thanks !