Wireless

Hi,I am deploying 4 1552E APs on a location. The APs are powered up and they show up on the CDP neig table on my switches. The interfaces facing the APs on the switches are access interfaces tagged with Vlan 3 which is the management Vlan of the APs....

Hello,We would like to put Mac Address Filters for some APs on the same floor. As far as the roaming characterics, roaming is decided by the client which it chooses the best AP with signal quality. If the Client tries to roam to an AP with Mac Addres...

Por favor, considerem o seguinte cenário:Um ambiente com 10 APs 1142 e uma controller 2504. Gostaria de adicionar CleanAir para oferecer uma maior inteligencia contra as interferências na rede. Pensei em colocar alguns APs 3500 para isto em LMAP. Min...

HiI am having problems with my WISM2 witch 7.2.111.3 version.When talking to my partner, they sad it was a known BUGCSCtr17396 Bug Details Top of FormWLC crash : pmalloc memory corruption Symptom:Software was stopped for the following reason:pmalloc ...

                   Is is possible to extend wireless network using workgroup bridge. Following is the  scenario.Root AP - - - - -  - - -  - - - -  - - - - WBG-------Switch------AP                 

Hello,just some best-practise questions regarding the new HA feature of 7.3 code:With use of AP-SSO and the hot-standby controller, as I understand during software update on the primary controller the code is copied to the hot-standby controller in t...

Today in the office I saw an strange behaviour with the 5.0 Ghz antenna I was monitoring the antena with inssider because suddenly this morning interrupted my wifi connection (only 5 GH antena was affected, 2,4 client didn't suffer the interruption)S...

I have many 1262N and 1031AG APs. when the client is connected to the AP 1262N the performance is slower than it is connected to AP 1031AG (with more clients) in 2.4GHz. any idea why this behavior.

HI, i have 2 ssid with the same comfiguration (diff only in name) in one ipsec ssid vpn (l2tp over ipsec with natt ) works fine, in another after phase 2 is completed no traffic is forwarded and vpn session is dropped. There are no access lists on eq...

I see many "Load threshold violation" messages in NCS server. any idea why and how can i fix it?

I would like to create a Mesh network using Cisco 1242 AP's running in Autonomous mode via A Channel. Any help on this project would be greatly appreciated

Hi a i have this version Ap "c1200-rcvk9w8-tar.124-21a.JA2" and a WLC 5500. When i connect the ap to the network i can ping from ap to wlc and the wlc to ap,  but the proccess of lwapp messages give errors on the Ap when the Ap try to download the im...