06-27-2022 10:02 PM
how's everyone tackling the dynamic MAC address challenge in new android & Mac devices. Our SSID is MAC filtered, MAC address is added to WLC and those are permitted to connect.
Issue is client device MAC address keeps on changing as it has dynamic mac enabled.
Solved! Go to Solution.
06-27-2022 10:23 PM
I understand you don’t have ise, but this might give you a good outlook on your problem
there is no silver bullet to this issue, if it’s managed device then you can use MDM to turn off max randomization, otherwise move away from MAB to 802.1X, MAB it’s highly insecure anyways.
hope this helps
06-27-2022 10:23 PM
I understand you don’t have ise, but this might give you a good outlook on your problem
there is no silver bullet to this issue, if it’s managed device then you can use MDM to turn off max randomization, otherwise move away from MAB to 802.1X, MAB it’s highly insecure anyways.
hope this helps
06-27-2022 11:49 PM
@ammahend you are right, we are not using ISE or MDM. I think there's no option now we can't use WLC MAC filtering until client turns of dynamic mac address.
06-28-2022 03:47 AM
Hi
This feature only make netadmin lifes harder. To me, the best option is disable it. I see no gain and a lot of problem, inclusive in ISE.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide