09-23-2008 03:21 PM - edited 07-03-2021 04:31 PM
Just looking at deploying express 526 to multiple sites, I suggested the 2100 series for scalability and fallback to a 4400 from multiple 2100s but money may be an issue for the client.
I am unclear if the 526 can be managed via a WCS ? Antone know for sure
09-23-2008 04:01 PM
Hi Pete,
The 526 cannot be managed by the WCS. This is shown in this good Q & A doc;
Q. Can the Cisco Mobility Express Solution also be used by enterprises as branch-office solutions?
A. It is strongly recommended that enterprises not deploy the Cisco Mobility Express Solution as a branch-office solution. The Cisco Mobility Express Solution was built for SMB customers. It does not provide many of the advanced features ideally suited for distributed enterprise networks that the Cisco Unified Wireless Network Solution supports, such as centralized management through the Cisco Wireless Control System. For this reason, the two solutions were intentionally kept distinct and are designed for different environments.
Hope this helps!
Rob
09-24-2008 09:31 AM
Thanks Rob
Had read some about it and wasnt 100% clear. Hadnt seen the Q&A so many thanks.
09-24-2008 12:21 PM
Hey Pete,
You are most welcome my friend!
Cheers!
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide