10-25-2017 09:32 AM - edited 07-05-2021 07:46 AM
I have a 2504 WLC series running 8.1.102.0 software version. Also I have 14 AIR-CAP1602E-A-K9 running the ap1g2-k9w8-mx.15.3.3-JBB software, and joined to the Cisco WLC in a production environment. Recently I bought 20 Air-Cap2702i-B-K9 running ap3g2-k9w8-153-3-JD software version, and I want to downgrade the software of my new acquisitions to ap3g2-k9w8-mx.153-3-JBB according to the compatibility matrix provided by Cisco to my current WLC's software version. The picture describes my problem. Any help will be highly appreciated, thanks in advance.
Solved! Go to Solution.
10-25-2017 01:11 PM
fslatwork@gmail.com wrote:
Is there another option where I don't need perform changes on the controller? Thanks in advance
Nope. Not possible.
10-25-2017 12:45 PM
Yes. Download the latest 8.2.X.X and it should enable/allow -B Regulatory Domain.
10-25-2017 12:56 PM
10-25-2017 01:07 PM
Is there another option where I don't need perform changes on the controller? Thanks in advance
10-25-2017 01:11 PM
fslatwork@gmail.com wrote:
Is there another option where I don't need perform changes on the controller? Thanks in advance
Nope. Not possible.
09-25-2023 12:19 AM
ap3g2-k9w7-tar.153-3.JPQ Cisco 2700i AP OS download
02-21-2024 08:43 AM
@supportpune the IOS image you have referred to is an autonomous IOS AP image (k9w7) and will not work for a lightweight AP (k9w8). Lightweight APs must run the same image version as the WLC they connect to and will normally download that image from the WLC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide