cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1245
Views
0
Helpful
1
Replies

FLEXCONNECT And Internet Access

NETAD
Level 4
Level 4

Hello, at a remote office we have couple of AP's serving some clients. The APs are in Flexconnect mode connecting to the WLC over the MPLS and internet traffic is also being backhauled through the MPLS. Is there a way we can have the AP's connect to the WLC over the MPLS but use the remote office internet circuit for outside access? 

1 Accepted Solution

Accepted Solutions

NETAD
Level 4
Level 4

This was fixed by ticking the flexconnect checkbox under the wlan options.

View solution in original post

1 Reply 1

NETAD
Level 4
Level 4

This was fixed by ticking the flexconnect checkbox under the wlan options.

Review Cisco Networking for a $25 gift card