01-08-2017 10:51 PM - edited 07-05-2021 06:19 AM
Does anyone have an idea when FlexConnect mode will be supported for the AIR-LAP1041N-A-K9 access points?
01-09-2017 12:48 AM
FlexConnect access points (known as H-REAP access points in the 7.0.x releases) that are associated with a Cisco WLC that has all the 7.0.x software releases prior to Release 7.0.240.0 upgrade to Release 8.0.100.0, the access points lose the enabled VLAN support configuration. The VLAN mappings revert to the default values of the VLAN of the associated interface. The workaround is to upgrade from Release 7.0.240.0 or a later 7.0.x release to Release 8.0.100.0.
Please refer
https://supportforums.cisco.com/discussion/13197271/flexconnect-support-air-lap1041n-k9-access-points
01-09-2017 02:27 AM
Since the AP is end of support, I doubt that it will ever support FlexConnect. The FlexConnect matrix still doesn't show support for that model AP.
-Scott
*** Please rate helpful posts ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide